Amazon.co.uk Affiliate Links (click to shop and support this blog)

Sunday 25 March 2012

Skallagrim's Excellent Youtube Channel

SkallagrimNilsson is a good Youtube friend of mine and I'm here to advertise and recommend his channel, if you like Firearms, Swords / Knifes and many different types of weapons as well as philosophy and general Rant videos you'll love his channel, he also makes his own animation videos and has created some very funny parodies with his girlfriend  - Cara - he has also designed his own Bottle Opener Knukle Duster that will be included in this Blog entry.
Below are a selection of my favourite videos and some links to his channel / websites.
Skal's own design Bottle Opener Knuckle Duster -
And now some links to Skal's Channels and Websites (just click the names) -
I hope you enjoy his channel, and if you liked this blog entry I'm sure you will as it only a taste of what is on his great channel.
Feel free to leave a comment below letting me know what you think, Thanks!

TAGS : Firearms, Knives, Swords, Parody videos, knuckles, Brass Knuckles, Brass Knucks, Poing Americain, SkallagrimNilsson, Skallagrim Nilsson, Skallagrim, Skall, WeaponCollector,

Thursday 15 March 2012

How to make a Resetting Air Rifle / Pistol Target - PART 2

The Finished Target










How to make a Resetting Air Rifle / Pistol Target - PART 2

PART 1 is HERE

Tools and Materials : Wood Saw, drill and some small and large drill bits and a large 2" wood cutting drill bit, Tin Snips / Shears, hammer, hacksaw, vice, glue, Some scrap wood, at least 3ft x 4ft (I used Pine) also some dense wood like Plyboard - about 15cm x 30cm should do, various screws (large and small) some screw-in eyelets and some washers, a spring, 1ft of copper tubing, and 1ft of threaded rod or similar rod that will fit inside the copper tube, 1ft x 3/4" steel 3mm thick, and some tin - 1mm or 2mm (I used 3 fence post brackets, but any tin will do)


All Materials are featured in the pics above and any similar type of materials will do for this project
 
PART 2 : Now remove the swinging plate and take your pieces of tin and drill various holes and screw in onto the plywood plate (as shown in pics two and three), now add the spring using a screw and a small eyelet as shown in pic three.
 
Then cut a board to go above the swinging plate 10" x 7" and glue and screw that on. now drill a hole big enough for the threaded rod 2" in, and 2" 1/2 high (pic five)
 
Now cut 3 pieces of plywood 1" 1/2  x  1"1/2  and cut some tin 1" 1/2  x  4" 1/2 fold the tin over the wood leaving a gap at the top big enough to hang them on the threaded rod, this will act like a hinge, now glue and screw the tin onto the wood. then cut the tubing into 1" and 1" 3/4  lengths to act as spacers and thread a spacer on, then a tin plate, then spacer and so on, as shown in pic seven.
 
Now just cut a lid approx 11"1/2  x  7" and screw that om, all you need to do now is screw on the steel protector just above the shooting two holes  (drill four holes in the steel) and then you can paint it any colour you like.
 
That's it, one homemade resettable target for Air Guns
 
VIDEO DEMO BELOW
 

 



Please feel free to leave a comment if you need help or just want to discuss this topic. Thanks!

TAGS : Homemade Air Rifle Pistol Resetting Target dueling duelling tree Shooting Sport Range DIY home made easy to follow tutorial howto how make swing swinging resetable .22 .177 auto reset scrap materials airgun air gun

How to make a Resetting Air Rifle / Pistol Target - PART 1

The Finished Resetting Target










How to make a Resetting Air Rifle / Pistol Target - PART 1

Tools and Materials : Wood Saw, drill and some small and large drill bits and a large 2" wood cutting drill bit, Tin Snips / Shears, hammer, hacksaw, vice, glue, Some scrap wood, atleast 3ft x 4ft (I used Pine) also some dense wood like Plyboard - about 15cm x 30cm should do, various screws (large and small) some screw-in eyelets and some washers, a spring, 1ft of copper tubing, and 1ft of threaded rod or similar rod that will fit inside the copper tube, 1ft x 3/4" steel 3mm thick, and some tin - 1mm or 2mm (I used 3 fence post brackets, but any tin will do)
All Materials are featured in the pics above and any similar type of materials will do for this project.

To Start - Take two bits of tin 8" 1/2 x 2" 1/2, place together as shown in pic three and draw on two 2" circles in the centre that are 2" apart and then cut out using the tin snips or any way you like.
Then drill various small holes in the tin to secure it to the wood base using screws, as shown in pic five

Once done cut a piece of pine wood or what ever you have to 10" x 5", place you tin on the woods as a template and draw where the holes are, then using the 2" drill cut out the holes as shown in pics six and seven.
Once cut out screw the tin onto the wood as shown in pic seven.

Now cut two bits of wood 7" x 10" 1/2 for the sides and glue and screw onto the front plate as shown in pics eight and nine and cut a board 10" x 6" 1/4 for the base and glue and screw that on too.
Then cut two bits of  tin 4" x 3" 1/4  and also one bit of the denser wood the same size - 4" x 3" 1/4,
at the same time get your eyelets and  put one in the middle of the front plate at about 7mm high, then add a screw to the plyboard plate ( the 4" x 3" 1/4 one) slip the screw over the eyelet and then add the other eyelet about 5mm above the top of the plyboard plate (last pic) and add a screw and washer as shown, this creates a hinge , make sure your plate is swinging o.k.

This is the end of PART 1 , part two is HERE

Please feel free to leave a comment if you need help or just want to discuss this topic. Thanks!!

TAGS : Homemade Air Rifle Pistol Resetting Target dueling duelling tree Shooting Sport Range DIY home made easy to follow tutorial howto how make swing swinging resetable .22 .177 auto reset scrap materials airgun air gun