Affiliate Links (click to shop and support this blog)

Gearbest Affiliate Links (click to shop and support this blog) Affiliate Links (click to shop and support this blog)

Wednesday, 25 May 2016

LUMINTOP® Tool AAA Flashlight Review

$19.98 / £13.77

INFO: 1. It does not Have Mode Memory. It Starts in Medium, and with Each Half Press, Then Goes M-L-H-M-L-H-M-L. If the Light is Left Off for Less Than 3 Seconds, it Behaves to Next Mode Memory. And it Will be Back to Medium Again If You Leave it Off for Over 3 Seconds.
2. Water Resistant: IPX-8 (2 meters) No-Skid Stripe on head, body and tail, One-Hand Operation. Clicky Design is set for not easy to turn on the flashlight when in pocket. If you don't wish to switch the mode by clicking frequently, there is actually a Half Switching Fuction on it, which you could simply switch the 3 modes by clicking half of after turning it on.
3. Night Glow, It's silent when twisting. Small, Sturdy, Dual Tail Caps, it has click tail cap, or magnetic tail cap, it got reversible pocket clip, it could be using under all kinds of test¡­still stay on stably.
4. While we all want our lights to have a powerful high setting, a truly low setting is very valuable for navigating a dark space without upsetting night adjusted vision or disturbing a spouse/family member/friend.

Detailed Features

1) Utilizes a latest CREE XP-G2 (R5) LED with 50,000-hour lifetime
2) Output mode/Runtime: High: 110 lumens/30 Minutes, Mid: 32 lumens/4 hours, Low: 5 Lumens/36 hours
3) Boasts a peak beam intensity of 553cd and a throw distance of up to 47 meters
4) High-efficiency digitally regulated circuit to maintain a constant brightness as battery life diminishes
5) High strength aerospace aluminum alloy construction with anti-scratching type HAIII military grade hard-anodized finish
6) Precision micro-textured reflector creates smooth, optimized beam
7) Multi-Function, bit tail clicky switch provides one-handed operation and easy access to all functions
8) High quality detachable stainless steel reversible clip makes it durable and keeps a firm grip on your pocket or hat
9) Impact resistance to 1.5 meters and waterproof in accordance with IPX-8 (submersible to 2 meters)


Bulb: Cree XP-G2 R5 LED
Output / runtime:
5 lumens (36 Hours)
32 lumens (4 Hours)
110 lumens (30 Minutes)
Max Beam Intensity: 553cd
Max Beam Distance: 47 Meters
Modes: 3 Modes(Mid(Default)-Low-High)
Length: 3.2" (81.5mm)
Head Diameter: 0.57" (14.5mm)
Body Diameter: 0.57"(14.5mm)
N.W: 0.53oz(15g)
Working Voltage: 0.9v-1.5v
Battery Type: 1 X AAA (10440 Not Supported)
Water Resistant: IPX-8 (2 meters)
Impact Resistant: 1.5 meters
Accessories: O-ring, Keychain

t: 86-755-88838666| m: (86)13600100862
e: | w:

ThruNite T10T Titanium Flashlight / Torch

 Thrunite link - (Coupon Code: THRUNITE - limited time!)
Amazon Link -

Product Description

Features and Specifications Cree XP-L LED with a lifespan of 20+ years of run time. Runs on one Ni-MH AA battery (1900MAH). Max output: 208 lumens. Output mode: High (208lm), Low (13lm), Firefly (0.15lm). Peak Beam Intensity: 810cd. Max beam Distance: 57m. Working Voltage: 0.9V-3V Working Temperature: -20℃-40℃ Dimension: 93.5mm (Length) x 18.8mm (Diameter). Weight: 40.4g (without battery). Tail-switch and twisting head design. Titanium body. Tempered ultra-clear glass lens with anti-reflective coating. OP reflector gives perfect flood. Removable stainless steel clip. Stand on tail to serve as a candle with the wand covered on the head.



Click the tail switch to turn the light on and off. Loosen the head a bit can also turn the light off from on.

Changing Modes

Method 1: Half press the tail switch when the light is on to circle through Firefly, Low and High.

Method 2: When the light is on, loosen the head a bit until the light turns off and then tighten it in 2 seconds to change modes.

Method 3: Click the tail switch to change modes (Interval between two clicks should be less than 2 seconds).

Memory Function

Memory function is activated 2 seconds after the light if off. The light will turn on in the last mode accessed when it has been off for at least 2 seconds.

Battery replacement

Take off the tail cap, insert the battery with positive polarity toward the LED assembly(head of the light), install the tail cap and tighten all the way to operate the light.

Warning: Do NOT use 14500 battery for T10T for working Voltage limit.