How to make a Custom Fit Knuckle Duster

Making a Custom Fit Knuckle Duster - Although this is NOT a tutorial, rather a series of pictures I acquired of the "Making Of" a knuckle duster, it does show the process that is used to make one.
I requested these pictures because I thought it would be interesting to show others the process.

First the materials are sourced, in this case two different sized Aluminium plates or sheets, some self tapping screws and a bit of Walnut wood, the design is then drawn onto the metal using either a marker pen or scratched onto the metal using an awl.
The maker then drills holes in and around the drawn on knuckle duster shape, then using a hammer and flat head screwdriver or chisel the maker hammers between the drill holes to punch out the rough shape.

Then using various files the metal is filed and shaped until it resembles the rough shape of the knuckle duster, the palm rest is then connected using the screws and the wood glued and screwed onto the sides of the knuckle duster, at this stage the edges are still very rough, a small round file is used to round over the edges of the metal and wood to make it comfortable.
All that is required now is for the maker to sand the edges smooth using various sandpapers going from rough to smooth, the metal is then rubbed over with wire wool, and the wood is coloured (using a coloured wax) and then the knuckle duster is polished with Brasso to finish it off.

As you can see from the many entries in this blog this technique produces very nice custom made Brass Knuckles / Knuckle Dusters, using this method it takes the maker about 4-6 hours to produce one Knuckle Duster, however each design may take a longer or shorter time depending the design, materials and thickness. some materials can range from 6mm - 25mm, the materials that can be used range from Metals - Aluminium, Brass, Steel, Copper, to materials like Wood and Plastics, I have seen ones made from Oak, Walnut, Beech, and plywood, as well as Acrylic plastic and Chopping Board Plastic, even Stone and Antler can be used.

I hope you enjoyed this topic, if I can get some more "Making Of" pics I will do more of this type of entry.
(Remember this is NOT a tutorial, so I cannot help with any more details other than that which is included in the pictures and blog itself)

Please feel free to leave a comment letting me know what you think! Thanks.




Also Known as - Бокс (оръжие), Puny americà, Boxer (zbraň), Dyrnau haearn, Knojern, Schlagring, Puño de acero, Puño Americano, Altzairuzko ukabila, Nyrkkirauta, Tirapugni, ナックルダスター, Kastete, Kastet, Buku lima, Boksbeugel, Knokejern, Soco-inglês, Кастет, Boksar (orožje), Knogjärn, Muşta, 鐵蓮花, Knuckle dusters, knuckles,Brass Knuckles, Brass Knucks, Poing Americain, sell, for sale, trade, swap, selling

How to make Solid Brass Knuckles

Making a Solid Brass Knuckle Duster - Although this is NOT a tutorial, rather a series of pictures I acquired of the "Making Of" a knuckle duster, it does show the process that is used to make one.
I requested these pictures because I thought it would be interesting to show others the process.

First the materials are sourced, in this case a solid brass plate or sheet, the design is then drawn onto the metal using either a marker pen or scratched onto the metal using an awl.
The maker then drills holes in and around the drawn on knuckle duster shape, then using a hammer and flat head screwdriver or chisel the maker hammers between the drill holes to punch out the rough shape (not shown).
Then using various files the metal is filed and shaped until it resembles the rough shape of the knuckle duster, at this stage the edges are still very rough, a small round file is used to round over the edges and make it comfortable.
All that is required now is for the maker to sand the edges smooth using various sandpapers going from rough to smooth, it is then rubbed over with wire wool and then polished with Brasso.

As you can see from the many entries in this blog this technique produces very nice custom made Brass Knuckles / Knuckle Dusters, using this method it takes the maker about 4-6 hours to produce one Knuckle Duster, however each design may take a longer or shorter time depending the design, materials and thickness. some materials can range from 6mm - 25mm, the materials that can be used range from Metals - Aluminium, Brass, Steel, Copper, to materials like Wood and Plastics, I have seen ones made from Oak, Walnut, Beech, and plywood, as well as Acrylic plastic and Chopping Board Plastic, even Stone and Antler can be used.

I hope you enjoyed this topic, if I can get some more "Making Of" pics I will do more of this type of entry.
(Remember this is NOT a tutorial, so I cannot help with any more details other than that which is included in the pictures and blog itself)

Please feel free to leave a comment letting me know what you think! Thanks.





Also Known as - Бокс (оръжие), Puny americà, Boxer (zbraň), Dyrnau haearn, Knojern, Schlagring, Puño de acero, Puño Americano, Altzairuzko ukabila, Nyrkkirauta, Tirapugni, ナックルダスター, Kastete, Kastet, Buku lima, Boksbeugel, Knokejern, Soco-inglês, Кастет, Boksar (orožje), Knogjärn, Muşta, 鐵蓮花, Knuckle dusters, knuckles,Brass Knuckles, Brass Knucks, Poing Americain, sell, for sale, trade, swap, selling,

Handmade Solid Aluminium Kubaton (Kubotan)

Diagram shows possible improvements

Handmade Solid Aluminium Kubaton - A standard size Kubaton or Yawara stick, made for self-defense in a close-quarter situation, the principal areas for attacks in self-defense include bony, fleshy and nerve targets such as knuckles, forearms, bridge of the nose, shins, stomach, solar plexus, spine, temple, ribs, groin, neck, eyes etc. The Kubotan is usually held in either an icepick grip (for hammerfist strikes) or forward grip (for stabbing and pressure point attacks). Common uses include hardening the fist (fistload) for punching, attacking vulnerable parts of an assailant's body, and gaining leverage on an assailant's wrist, fingers and joints.

The Kubaton features a triangular style spike striking surface for use in a standard forward punching motion, this outer striking surface sits between the middle and index finger, it also has two other striking surfaces similar to a meat tenderiser, the entire tool supports all four fingers and has a flat palm rest.
The size is suited to Medium hands/fingers, but will fit smaller hands.

Weight is pretty heavy for its size and thickness.

Features the makers mark - WC-10, and KUBATON 1

Overall I would say this is a great little Kubaton, although with some adjustments could be even better.
These are also great concealable self defence weapons, due it its size it could be hidden in many places.

Dimensions - 80mm wide, 63mm high, 15mm thick.

Please leave a comment below letting me know what you think! Thanks.

Hand Made Push Dagger / Punch Knife

Yellow handled handmade Push Dagger / Punch Knife - push dagger, alternately known as: push knife, gimlet knife, fist knife, Stoßdolch, push dirk, or T-handled knife is a short-bladed dagger with a "T" handle designed to be grasped in the hand so that the blade protrudes from the front of one's fist, typically between the 2nd and 3rd finger. Over the centuries, the push dagger has gone up and down in popularity as a close-combat weapon for civilians and selected military forces.
The size for this one is small to medium or even large hands, Features a large T-handle with curved palm rest just big enough for all four fingers.
The blade is double edged and "live", but not razor sharp and made from tool steel.
Weight is average due to size, features a nylon plastic lined sheath.
Features no makers mark but was made by the person who makes most of my other weapons.
This is a standard push dagger design, very sturdy, and would make a formidable self defense fighting weapon, also makes a great display piece and talking point.

Dimensions - 80mm wide (handle), 140mm high (overall), 15mm thick (handle), 75mm (blade)

Please leave a comment letting me know what you think! Thanks.

Wasp Knuckle Duster / Brass Knuckles

Wasp Knuckle Duster / Brass Knuckles - An old unusual design knuckle duster painted yellow and black.
Although an unusual design knuckle duster it is basically a traditional design with the middle finger bar removed.
Painted using standard acrylic paint and then varnished with clear varnish, it stayed on the metal reasonably well but I have still not found a decent reasonably priced commercial paint that will not come of off the aluminium when carried in the pocket.
The size of hands / fingers this Knuckle Duster is made for is medium hands, but could fit both small and large hands.

Weight is low due it to its thickness and being made of aluminium.

Features no makers marks but was made by the same person who makes most of my other knuckle dusters, and was made around 2002 or before.
Features round finger holes and a curved palm rest and four spikes on the striking surfaces.
Overall a good old knuckle duster and unusual design that works well and looks reasonably good

Dimensions - 115mm wide, 75mm high, 6mm thick, Finger holes are 26mm round approx.
Please leave a comment letting me know what you think! Thanks.



Also Known as - Бокс (оръжие), Puny americà, Boxer (zbraň), Dyrnau haearn, Knojern, Schlagring, Puño de acero, Puño Americano, Altzairuzko ukabila, Nyrkkirauta, Tirapugni, ナックルダスター, Kastete, Kastet, Buku lima, Boksbeugel, Knokejern, Soco-inglês, Кастет, Boksar (orožje), Knogjärn, Muşta, 鐵蓮花, Knuckle dusters, knuckles,Brass Knuckles, Brass Knucks, Poing Americain

WeaponCollector's Urban Tanto Survival Knife (For Sale)

WeaponCollector's Urban Tanto Survival Knife, designed and created by myself.
The model shown is Available Now from myself, if you are interested in a Urban Tanto Survival Knife email myself at - weap0ncollect0r@aol.com - Prices and details below.
The Urban Tanto Survival Knives are Available to ship Worldwide, and are shipped from the U.K.

The Urban Tanto Survival Knives are approx 11" long and 1" 3/8 wide. all come with paracord wrapped handle and survival kit.
Each Knife/Tool consists of the following - 5" 1/2 blade, 1 x prying tool, bottle and tin opener, flat screwdriver, lanyard hole,  2.5m approx of paracord.

The Urban Survival kits under the paracord vary and can consist of  -
1 x lock Pick, 1 x tension tools, 1 x craft style blade / stanley blade, snare wire ,P-38 tin opener, matches, compass, magnifying glass, band aids / plasters, safety pins, wood saw, metal saw.
(No kit will include all these items, but will have many of them)

Each is hand made and fully hardened and tempered and each can be made to the buyers specification if wanted, these changes can include - adding a saw back,changing blade shape/ type, making the blade longer or shorter, making the handle thinner for smaller hands and other changes.

Recommended for E.D.C (Every Day Carry) - if legal to do so, or a in B.O.B (Bail Out Bag) or as a survival knife for camping. .
Great for survival due to the fact it contains so many tools - tin opener, para cord, blade and saws etc, all good for survival in urban or rural situations that occur everyday.
These are a great addition to any survival kit or every day carry bag, and a great alternative to the standard knives that are available.


PRICES  - Standard Knife with all tools, paracord and kit - £35 + £5 postage (prices and posatge may vary if customised and more then one item bought and depend on what changes were made)

Western Union Payment coming soon

Paypal can be a  payment option if needed, then private cheque / check, but other options are available

Dimensions :11" long, 1-3/8" wide, 1/4" thick approx,   

Please feel free to leave a comment below, Email me for all details of prices if you are interested (they are a fraction of the price of any commercial knives of this type)